The ICI pilling tester is suitable for detecting the pilling phenomenon caused by friction on the fabric surface without pressure, and is suitable for woven and knitted fabrics.
Meet the standards:
ASTM D3939, GB/T 11047, JIS L1058
Scope of application:
The ICI hammer-type snagging tester can quickly detect the ease of fabric snagging (that is, the yarn is hooked out of the fabric) under normal wearing conditions.
Product introduction:
This instrument is equipped with an observation box and comparison pattern cards of different fabric structures. Equipped with 4 test rollers (covered with the fabric to be tested), the hammer ball is a tungsten carbide head and is controlled by a predetermined electronic counter.
Instrument description:
This tester is suitable for testing knitted and woven outerwear fabrics and other fabrics that are prone to snagging. It is especially suitable for testing the snagging performance of chemical fiber filaments and their deformed yarn fabrics.
Precautions for using ICI Pilling Tester:
1. The voltage should be maintained stable during use to avoid burning out the power supply.
2. Clean the cork liner regularly with a suitable cleaning solvent, such as industrial methylated spirit or trichloroethane.
3. When replacing the experimental tube, the new experimental tube must be inspected before use.
4. Regularly check whether the control panel buttons and screws in various parts are normal.
5. Clean the instrument before and after each experiment to ensure that all lint and debris are removed from the box.
6. The reference fabric should be retested every six months and compared with the original test specimen.
Email: hello@utstesters.com
Direct: + 86 152 6060 5085
Tel: +86-596-7686689
Web: www.utstesters.com